A pipe or pipes can freeze up in the winter time when the temperature gets under 32 degrees. The best way for them to not freeze is to cover the pipes and make sure the bottom of your house is covered or is sealed up. Especially if your home is a trailer house, they have to be covered up well so no freezing will happen. If the pipes get frozen, you need to thaw them as soon as possible before they do damage to your home. You need to keep your faucet on at a steady drip all night to prevent freezing or busting one or more of your pipes.
Frozen pipes can crack or break your pipes, can stop water from coming into your home, and can also freeze up your water heater. If your pipes freeze up by the water heater, it can make the pipes burst, and it can cause a flood in your home, which can or will cause water damage to your home. Also, you can wrap your pipes with insulation to keep them from the cold, especially in small places. But you have to watch out because even insulated pipes can freeze. If you try to drain your water, and it does not go down, it is because it is frozen and it needs to be thawed out so the water will drain.
When you thaw them, you can use a hair dryer or a heater on them. If the pipes are frozen in the walls, you can cut open the walls so heat can get to them and they can thaw. You can also use a fan to warm it up, but it can take a while to thaw it. Frozen pipes are not uncommon. They happen every year when it gets really cold outside. You just have to try to get them from the cold. This way no damage will come to your home. If you have a tin around the bottom of your house, you need to screw them together so the cold will not get under your house. Tin can bend, and animals can get into the house very easily.
If the pipes are damaged, you need to replace it by getting a new pipe. You need to cut it with a pipe cutter or anything that will cut the pipes, get some joints to connect the pipes together, seal it up, and let it dry. But you need to measure the pipes before you put it together so it will be long enough because if you don't, it can be too long or too short. You also have to make sure you get the right size for the pipes for it to work. But make sure you turn off the water before you do this because you will have water spraying everywhere.
Well to provide you the correct explanation, experts say that water expands when it freezes. For example, think of ice cubes when you first put them in the freezer, the water is very well contained in its little tray. If the compartments are filled a little too full, and when you want to add a cube to your drink, you will find they are all frozen together and at one point the water in each compartment expands and fuses with the next compartment. The same physics is also applicable when a pipe bursts.
On a more detailed note, though, it's not usually the outward pressure of expanding water on the pipe walls that causes the pipe to burst. It's just because, when a pipe is completely blocked by ice, water gets trapped between the ice barrier at one end and the closed faucet on the other end. As water moves further down the pipeline and freezes, high pressure builds up between the blockage and the water tap, and so does the pipe will burst and that too from its weakest point.
A plumbing service company carries out many work operation depending on the cause of concern. Plumbing repairs, sewer cleaning services, residential and commercial plumbing repair, emergency plumbing service, drain cleaning, Frozen Pipes repair and waste water management are some of the tasks that a professional plumber would rather carry out.
In situations of calamities hiring a plumbing and drain cleaning company is the only and best available option for you. But if the situation is a dangerous one do remember the below points.
Don't be agitated, Stay calm - Just because your have Frozen Pipes doesn't mean it has or will burst. Check it thoroughly, if you think you can handle the situation, you can go for it, but if think the leak is a major one do not hesitate to call up an emergency plumbing service company.
Check out for the main water valve - This is necessary if you know your water pipe has burst, as it's the only way to stop the flowing H2O. But it's a good precaution if your pipeline is frozen if there is a small crack which you're unaware of as the water is frozen.
Search the location of the frozen section - To locate the section where the pipe has frozen is of utmost importance. This will be a part of the pipe that is noticeably colder than the rest, and there also could be more than one if you have multiple blockages.
Turn on the cold water tap and then Warm the Pipe - To stabilize the flow of water, turning on the cold water will enable the water to escape safely down the drain when it melts. And in the task of warming up the pipe, using the good home remedy of using the hairdryer is very apt, unless the pipeline has burst and there's water flowing. While performing this task, start from the closest tap and work your way towards the frozen area. Keep in mind to never use an open flame to thaw a pipe, as it's a fire hazard and could damage your pipelines.
Inspecting the cracks and fixing the problem - Inspecting the pipe for cracks ensures you of the future plumbing problems. You'll want to know you won't cause a flood when you turn your main water valve back on. To avoid the menacing call in a reputable and licensed professional plumber to assess the situation and make recommendations.